Menu

FAQs and Answers

Parent Categories

All FAQ Categories

Subcategories

Surface Preparation and Suitability

FAQ: Easi Paint applicator questions

Click the question to reveal the answer, click the question once more to hide.

[Show ALL Answers]
Q

Do I need to thin down water based paint?

Q Can I do louvre doors?
Q Can I use a brush for water paint, wash it out and then use that same brush for oil paint? And vice versa? Or must I have two identical brushes and keep them separate - one only to be used for water paint and one only to be used for oil paint?
Q Can I use the brushes on brickwork?
Q Can I use the brushes on textured hardy plank?
Q Can I use thinners to clean up polyurethane?
Q Can I use timber oil on decking?
Q Can I use varnish?
Q Do I need to do anything before using the brushes?
Q Do I need to thin down oil based paint?
Q How can I paint rough timber?
Q How do I attach or detach a pad to/from a brush?
Q How do I get a fantastic finish with oil based paint?
Q How do I get a straight line where 2 colours meet in a corner?
Q How do I get into the corner where wall meets the same coloured wall?
Q How do I get the extension clip out?
Q How do I load the brushes?
Q
A
Remove the pad from the medium handle and turn it sideways before you put it back in ... you'll see that it's too long this way. Bend it gently in the middle and click the pad back under the clips it's now a perfect fit for standard cornice. For small cornice and corrugated sheeting ... leave one side of the pad in place and move the other side into the big window in the centre of the handle ... in one more notch ... use the other side of the window in the handle ... for tight beading and panelling ... deeper recesses ... colonial doors and windows.
Q How do I paint a door?
Q How do I remove the pads so that I can replace them?
Q How much paint do I put in the tray? How full?
Q How would i go using the faux finish pad with suede paint effects?
Q I have a big floor to do with estapol, can I use the large brush?
Q Should I do the cutting in first?
Q What is the best method to paint double hung windows using oil-based enamel?
Q What's the best way to do cutting in and edging?
Q What's the best way to paint a ceiling?
Q What's the best way to paint a plaster wall?
Q What's the best way to paint cement render?
Q What's the easiest way to paint lattice?
Q What's the easiest way to wash the pads?
Q Which brush do I use for VJ panelling?
Q Which brush would I use for wrought iron?
Q Why does the Easi-Paint system use only half the amount of water based paint?
  TOP   |  Back
  Suggest a new FAQ